Micro Star^TM railing and multi-purpose lights feature a 316 stainless steel housing for maximum corrosion resistance.  The Micro Star^TM Track Lights are made up of a water resistant composite material.

Suncor Stainless, Inc. and Atlantis Rail Systems warrant its lighting products to be free of defects in material and workmanship under normal use and with normal maintenance for a 5 year period. This Limited Warranty extends only to the original retail purchaser and does not run to any subsequent purchaser.
If the product fails, we will repair the product or send you a new part free of charge, provided the product has been given reasonable care, has not been used for commercial service, and the damage has not resulted from improper installation, accident, negligence, misuse or from unauthorized alterations by the purchaser.
For complete warranty details including our return policy and disclaimer, please view our Consumer Warranty.

Our low voltage LEDs require the use of a DC transformer. This will ensure proper installation and will provide years of service and reliability with optimal results. Using an AC transformer will result in flickering of the lights and pre-mature burn-outs.
NOTE: RailEasy™ 18W Post Cap requires a 12v AC power source capable of delivering 18 watts of power per light.  4 lights will require a 72 watt low voltage AC transformer.

Micro Star^TM LEDs are offered in a variety of colors based on the application. Track lights, post cap lights, railing lights and edge lights feature bright white LEDs due to the nature of their end use. These products are typically used in commercial and residential applications where the clean look of white lighting does not distract from the elements they are designed to illuminate. However, the multi-purpose line of LED lighting is offered in a variety of colors to meet any design need.

The Micro Star^TM LED products featured on this website are supplied with coated 22 gauge low voltage copper wiring. The Micro Star^TM Track Light uses "solid strand" wire, while the remaining products are multi-strand wiring. The LED and 18W post cap products feature fittings on the end of each wire for easy connection.

Almost all of the LED lighting featured on this website is designed for use with our 12 Volt/ DC Micro Star^TM Transformer. However, there are a few 24 Volt Micro Star^TM LEDs that require a 24 Volt/ DC transformer.

Micro Star^TM lighting products provide sufficient levels of lighting to illuminate stairs, walkways, railings, decks, fences, landscapes and much more.  The 9 Star Cluster and the RailEasy™ 18w Post Cap provides excellent lighting.